My 90 Syncro/92 2.2L conversion has working cruise control...its a
snap to hook up. You only need a few parts off a Subaru with the
cruise control.
You will need the dual cam throttle cable plate setup that's
attached
to the throttle body ....not sure what you call it...the one you
want
has TWO places to attach cables....one for the throttle and one
for
the cruise control...if your engine only has one cable attachement
cam...you will need to get one off a Legacy that had cruise
control
that has two cams.
> >
The other pieces you need are the cruise control cable that
attaches
to the throttle body back to and including the round vacuum servo
and
its mounting bracket. Mine is about two inches in diameter and
black
plastic....the ones on later model cars are quite a bit bigger.
> >
Thats all you need.....just attach the cable to the throttle
body....screw the bracket holding the servo into a convenient
sidewall of the engine bay (mine is on the passenger side just
under
the lid) and plug the vacuum hose from the Vanagon cruise control
right into it. Should be "plug and play"....mine worked
perfectly
right from the get-go.
> >
Warren C.
Moderator




Piece of cake.....if you already have CC in your Van.

Just fasten the Subaru servo unit ( a round black plastic piece abou
the size of a baby food jar) to the side of the engine bay in some
convenient spot....(mines on the right side)...and connect the VW
vacuum hose to it...hook up the throttle cable....and...as the
English say,...."Bob's your Uncle!".

Warren C.