convert pre-written instructions to pdf from out at 
C:\Documents and Settings\BrentW\My Documents\My Websites\My WebSite Stormcast\wwwroot\vanagon\HTML\05\07\slideshow.html

this from seth....
Hey Brent, Nice picture. You got it exactly. The cable will work 
just  fine. It barely long enough. Dont run it under the intake manifold thought. 
Just run it along next to the starter and then up over the manifold and 
around  to the stock subaru shield bracket. I don't think it will work if it runs  under the intake. Don't forget that the lever on the side of the 
transmission needs to be able to move all the way forward and then "click". THat is 
the kickdown that makes the trans downshift. At this point the throttle 
body should be wide open. Also check that it's fully closed at rest. It can 
be adjusted both at the trans and at the engine. I'd really like it if 
you could send me some pics of it installed if you have a motor and trans 
out  of the car. Thanks, Seth