Brass Fittings Needed

AutoTranny Cooler Adapter

(2) Thread Adapters - 12mm-1.5 X 3/8" ID Hose
(whatever combination needed to get from one to the other with a 90degree bend.

Aftermarket Oil Pressure Sender
(2) 1/4"NTP 45degree elbow (male/female

1/4" Petcock or needle valve for use with bleeding fitting on radiator return pipe.

1/4" tee X 5/8" to fit into the heater feed line just before it enters the expansion tank from the coolant manifold stack.


5/8" Heater Hose from Expansion Tank (top) to Coolant Manifold stack (top)
approx 24" run

3/8" (verify size) coolant hose to run from IAC to Coolant Manifold nipple.  
approx 24"